WISP - CPE 210

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

WISP - CPE 210

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WISP - CPE 210
WISP - CPE 210
2020-02-15 17:13:29 - last edited 2020-02-17 12:26:31
Model: CPE210  
Hardware Version: V3
Firmware Version: notsure

Hi,

I am quiet new to managing WISP for short distance about 1km.

 

I am using CPE 210 both for AP & Client.

 

is there best configuration to set it up.

current status I was able to share my internet from home to my cousin house.

 

my concern is the internet speedtest result from client side did not reach 50mbps since my AP from home has 50mbps on it.

 

are there anyone that you can suggest?

 

for the tower infrastructure there is a one 3 storey house block my pole(next to mine)  do you think it would still matter? or do I need to increase the height of my main pole so I can get a better or a high speed internet from my client ap?

thank you and best regards,

  0      
  0      
#1
Options
1 Reply
Re:WISP - CPE 210
2020-02-17 17:46:16 - last edited 2020-02-17 17:46:50

 

Arjz wrote 

my concern is the internet speedtest result from client side did not reach 50mbps since my AP from home has 50mbps on it.

 

are there anyone that you can suggest?

 

You can try to set 802.11n-only mode, 20 MHz channel bandwidth, turn MAXtream off and set the Distance setting accordingly. But reaching 50 Mbps in 2.4 GHz band can be difficult, it strongly depends on how many foreign APs are around.

 

for the tower infrastructure there is a one 3 storey house block my pole(next to mine)  do you think it would still matter? or do I need to increase the height of my main pole so I can get a better or a high speed internet from my client ap?

 

Of course it matters for directional links. Make sure you have fresnel zone clearance, this will determine the required height of the CPE on a pole. 

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  1  
  1  
#2
Options

Information

Helpful: 0

Views: 1048

Replies: 1

Related Articles