Business Community > All Threads > Is it possible? Client PC --L2TP VPN--> TL-R600VPN --> IPsec VPN --> Remote site
< All Threads

Is it possible? Client PC --L2TP VPN--> TL-R600VPN --> IPsec VPN --> Remote site

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Is it possible? Client PC --L2TP VPN--> TL-R600VPN --> IPsec VPN --> Remote site

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Is it possible? Client PC --L2TP VPN--> TL-R600VPN --> IPsec VPN --> Remote site
Is it possible? Client PC --L2TP VPN--> TL-R600VPN --> IPsec VPN --> Remote site
2020-03-20 18:03:13 - last edited 2021-04-19 11:24:30
Model: TL-R600VPN  
Hardware Version: V4
Firmware Version: 4.0.3 Build 20190227 Rel.48206

Hi,

I wonder if it is possible that a PC connecting remotely to my router TL-R600VPN using L2TP can reach the network we have at the other end of an IPSec VPN connecting our router? 

 

Scenario:

 

[PC] ---- [L2TP VPN] ---> [TL-R600VPN LAN 172.16.16.0/24] --- [IPSec VPN] ---> [Remote net 10.2.2.0/24]

 

I made the configuration and both VPNs work, but PC can not reach 10.2.2.0/24 network. 

 

I'd appreciate your advise.

 

Thanks.

  0      
 
  0      
 
#1
Options
1 Reply
Re:Is it possible? Client PC --L2TP VPN--> TL-R600VPN --> IPsec VPN --> Remote site
2020-03-23 02:05:35 - last edited 2021-04-19 11:24:30

@chabral 

 

IPsec VPN may not meet your requirements. If you use L2TP VPN for both sides, maybe can meet your demand.

 

[PC/192.168.0.0/24] ---- [L2TP VPN] ---> [TL-R600VPN LAN 172.16.16.0/24] --- [L2TP VPN] ---> [Router A / Remote net 10.2.2.0/24]

 

Suppose that the topology is as above. 

For your PC, you can make the L2TP VPN server as PC's gateway. It means that all traffic of PC will be sent to VPN server.

For router A, it needs to support to set up static routing and use VPN interface as next hop. Then add a static routing that  destination is 192.168.0.0/24 and next hop is the VPN interface's IP. VPN interface's IP is the VPN local IP you set on R600VPN.

 

Because the traffic can be forwareded based on routing in L2TP VPN, so we can use the above method, make PC and router A has the corresponding routing. IPsec is not based on routing so cannot meet the demand.

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 1024

Replies: 1

Related Articles
TL-R600VPN - Force Connection to L2TP Client
937 0
TL-R600VPN - VPN L2TP download problem
668 0
TL-R600VPN L2TP connection fail
3302 0
VPN with TL-R600VPN
4531 0
Tplink TL-R600VPN Router - Dropping IP L2TP VPN Connections
1223 0
TL-R600VPN publish virtual server over L2TP
1240 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.