CPE210 in repeater mode --

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CPE210 in repeater mode --

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE210 in repeater mode --
CPE210 in repeater mode --
2020-04-02 01:18:52 - last edited 2020-04-04 01:27:19
Model: CPE210  
Hardware Version: V2
Firmware Version: 2.2.1 Build 20190620 Rel. 61487 (5553)

I want to extend my current in-home wi-fi network outdoors. My plan is to mount the CPE210 outside and run an ethernet cable to it from my switch. 

 

I have the CPE210 working in repeater mode. It's locking on my current AP and I see a boost in my signal on my phone.

 

Sounds great, but this configuration is without the LAN connection enabled, PoE only. I wanted to be able to connect the CPE210 directly to my LAN via ethernet cable.

When I connect the ethernet cable, my internet goes in and out. Is there a way use repeater mode with an ethernet cable LAN connection?

 

Thanks,

NB

  0      
  0      
#1
Options
1 Accepted Solution
Re:CPE210 in repeater mode ---Solution
2020-04-02 03:02:57 - last edited 2020-04-04 01:27:19

@utahband, use AP mode rather than Repeater mode to extend your WLAN outdoors.

 

Keep in mind that CPE210 has been designed for long-range directional links between two CPEs and its antenna beam width is just 65º (H) / 35º (E). This means that the WiFi signal quality depends on your position. It's a very narrow coverage only, not like a standard access point which has 360º coverage.

 

I would recommend EAP225-Outdoor to get better coverage outdoors when using standard clients such as smartphones to connect to an AP.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:CPE210 in repeater mode ---Solution
2020-04-02 03:02:57 - last edited 2020-04-04 01:27:19

@utahband, use AP mode rather than Repeater mode to extend your WLAN outdoors.

 

Keep in mind that CPE210 has been designed for long-range directional links between two CPEs and its antenna beam width is just 65º (H) / 35º (E). This means that the WiFi signal quality depends on your position. It's a very narrow coverage only, not like a standard access point which has 360º coverage.

 

I would recommend EAP225-Outdoor to get better coverage outdoors when using standard clients such as smartphones to connect to an AP.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
Recommended Solution
  0  
  0  
#2
Options
Re:CPE210 in repeater mode --
2020-04-03 20:23:16

@R1D2 Thank you so much for the advice. I ended up returning the CPE210 and picking up the AC1200 EAP225-Outdoor. The EAP225-Outdoor is much easier to setup as well. Appreciate the help!

  0  
  0  
#3
Options
Re:CPE210 in repeater mode --
2020-04-03 21:26:34

@utahband, you're welcome anytime. Have fun with EAP225-Outdoor, it's a pretty nice AP and offers much more bandwidth than a CPE.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 3348

Replies: 3

Related Articles