Business Community > All Threads > EAP245 Wireless Bridge
< All Threads

EAP245 Wireless Bridge

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP245 Wireless Bridge

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP245 Wireless Bridge
EAP245 Wireless Bridge
2020-04-02 15:54:51
Model: EAP245  
Hardware Version: V3
Firmware Version:

We have 2 EAP245s in our wifi network and use Omada for configuration.  We have a machine with a LAN port (no wifi capability).  Can I use another EAP245 as a wireless bridge?  This EAP245 would not be connected to the network via cable, only WiFi.  Could a mesh network work for this?  I'm not very familiar with mesh networking.

 

If this will not work, how would you do this?

  0      
 
  0      
 
#1
Options
4 Reply
Re:EAP245 Wireless Bridge
2020-04-02 16:04:01 - last edited 2020-04-02 16:10:10

@DeadCenter, yes, you could use a mesh network. Just link EAP #3 with either EAP #1 or EAP #2 (or use automatic fail-over to use EAP #2 if the link to #1 fails).

 

Wired mesh EAPs are root nodes, meaning you can link other mesh nodes to them. Note that you need Omada controller to configure a mesh network and to use automatic fail-over. AFAIK, meshing for EAP245 still needs a beta firmware, if you want to try it, contact TP-Link support.

 

Here are FAQs for meshing if you want to find out more: https://www.tp-link.com/us/support/faq/2283/

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  1  
  1  
#2
Options
Re:EAP245 Wireless Bridge
2020-04-02 16:26:26

@R1D2 Unfortunately, I've just learned that the EAP245 firmware does not support mesh at this time.

  0  
  0  
#3
Options
Re:EAP245 Wireless Bridge
2020-04-02 16:46:46

@DeadCenter , see this post (#33). There is a beta software which supports mesh on EAP245. You need to ask TP-Link for this beta software to test it.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#4
Options
Re:EAP245 Wireless Bridge
2020-04-03 14:39:17

Hello @DeadCenter,

 

Or buy an EAP225V3 from Amazon for $58.  But the Beta software is free.

 

In my home home, I use MOCA over coax for one of my EAP's (225V3) which when connected with a small ethernet switch also services my AV equipment in that room.  Now with MESH support, if my MOCA flakes out (a couple times per year usually when my FIOS router restarted), it fails over to MESH which is really nice.

 

-Jonathan 

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 5031

Replies: 4

Related Articles
Usage of Mesh and Bridge AP with EAP 245
3834 0
EAP245 work in bridge mode (trabalha em modo bridge)
313 0
EAP245 How to clear wireless status
1341 0
EAP245 Omada Controller - How to remove wireless B and G on 2.4Ghz?
1529 0
EAP245 WPS
690 0
OC200 + EAP245 V3 - wireless speed optimization?
5753 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.