802.1x MAB: 5-10% Packetloss

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

802.1x MAB: 5-10% Packetloss

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
802.1x MAB: 5-10% Packetloss
802.1x MAB: 5-10% Packetloss
2020-05-29 16:31:59
Hardware Version: V2
Firmware Version: 2.0.0 Build 20180710 Rel.64648(s)

Hi,

 

i just tried to set up 802.1x with MAB on my T2600G-18TS. The client authenticates fine on the radius server and is connecting to the network. But i get a constant packetloss of about 5-10%. When i switch off 802.1x on that port it's immediately fine again. When i turn it back on, packets keep getting dropped.

I tried different client devices and i tried to ping different targets. All the targets i tried are connected to the same switch as the client so no other hardware is at play here.

 

i did a tcpdump on the target device and the dropped pings don't even reach it.

 

i did a complete config reset and just set up 802.1x with MAB again on the switch to make sure i didn't mess up something else but still the same problem

 

any idea what could cause this?

  0      
  0      
#1
Options
3 Reply
Re:802.1x MAB: 5-10% Packetloss
2020-06-11 10:04:27

@Tsia 

 

You can upgrade the new formware for T2600G-18TS. When you meet the issue, make sure the client already change to authorized status on T2600G-18TS.

  0  
  0  
#2
Options
Re:802.1x MAB: 5-10% Packetloss
2020-06-12 10:02:58

@Andone I can't find any newer firmware for this device.

 

The client is shown as "authorized" in the web inte

  0  
  0  
#3
Options
Re:802.1x MAB: 5-10% Packetloss
2020-06-15 09:39:40

@Tsia 

 

The latest firmware download link.

https://static.tp-link.com/2019/201907/20190717/T2600G-18TS(UN)_v2_190516.zip

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 925

Replies: 3

Related Articles