Cpe220 repeatedly disconnecting from hidden network
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I bought cpe220 just few months ago. And worked fine with receiving signal from other cpe2xx and nanoStation products. But today I tried to connect it to home wifi router model (d-link 2740u) placed nearby my home with hidden ssid and wpa2 password encryption. And my cpe220 configured in (AP client router mod+dynamic Wan ip) all the wireless information configured correctly but my cpe220 connect to d-link wireless signal for few seconds then disconnect and again connect and disconnect in loop over and over I tried client mode, messing with cpe220 wirless parameters, static wan ip, lock to AP. Nothing work. I also changed all d-link wireless settings. But noticed that the only thing that keeps the cpe220 connection hold is enabling the "ssid broadcast" in d-link router
###this is a sample of the system log file.########
2015-01-01 00:11:09 DHCP NOTICE DHCPC Send REQUEST to server 192.168.1.1 with request ip 192.168.1.2
2015-01-01 00:11:11 DHCP NOTICE DHCPC Send REQUEST to server 192.168.1.1 with request ip 192.168.1.2
2015-01-01 00:11:13 DHCP NOTICE DHCPC Recv ACK from server 192.168.1.1 with ip 192.168.1.2 lease time 86400
2015-01-01 00:11:13 DHCP NOTICE DHCPC:GET ip:192.168.1.2 mask:255.255.255.0 gateway:192.168.1.1 dns1:192.168.1.1 dns2:0.0.0.0 static route:0
2015-01-01 00:11:13 DHCP NOTICE Dynamic IP(DHCP Client) obtained an IP successfully
2015-01-01 00:11:36 DHCP NOTICE DHCPC Unicasting a release of 192.168.1.2 to 192.168.1.1
2015-01-01 00:11:36 DHCP NOTICE DHCPC Entering released state
2015-01-01 00:11:39 DHCP NOTICE DHCPC Send DISCOVER with request ip 0.0.0.0 and unicast flag 0
2015-01-01 00:11:39 DHCP NOTICE DHCPC Recv OFFER from server 192.168.1.1 with ip 192.168.1.2
2015-01-01 00:11:39 DHCP NOTICE DHCPC Send REQUEST to server 192.168.1.1 with request ip 192.168.1.2
2015-01-01 00:11:41 DHCP NOTICE DHCPC Send REQUEST to server 192.168.1.1 with request ip 192.168.1.2
2015-01-01 00:11:43 DHCP NOTICE DHCPC Recv ACK from server 192.168.1.1 with ip 192.168.1.2 lease time 86400
2015-01-01 00:11:43 DHCP NOTICE DHCPC:GET ip:192.168.1.2 mask:255.255.255.0 gateway:192.168.1.1 dns1:192.168.1.1 dns2:0.0.0.0 static route:0
2015-01-01 00:11:43 DHCP NOTICE Dynamic IP(DHCP Client) obtained an IP successfully
2015-01-01 00:12:05 DHCP NOTICE DHCPC Unicasting a release of 192.168.1.2 to 192.168.1.1
2015-01-01 00:12:05 DHCP NOTICE DHCPC Entering released state
######################
Is it a bug or what??!
Is there any solution without enabling "broadcast ssid" option in the d-link router??
