Business Community > All Threads > MAC address filter per device
< All Threads

MAC address filter per device

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

MAC address filter per device

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
MAC address filter per device
MAC address filter per device
2020-08-21 17:52:19 - last edited 2020-11-23 09:21:15
Model: EAP245  
Hardware Version: V3
Firmware Version: 2.21.0

Hey there,

 

just wanna ask, if there is a setting, where I can prevent certain client from connecting to a specific access point.

 

I don't know why, but some clients always do connect to an accesspoint that is far away, even if there is an accesspoint that is in very near distance.

Result is a very weak connection speed.

 

I know this feature from many of my old access points, that I can prevent clients from connecting with it.

 

The only setting I found on omada controller or EAP245 itself is to prevent clients (MAC addresses) from connecting to SSIDs

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:MAC address filter per device-Solution
2020-08-21 23:34:12 - last edited 2020-11-23 09:21:15

@HKBlizzard,

 

you could set a RSSI Threshold in an EAP's configuration menu (under »Advanced« → »Load Balancing«) to avoid clients with a weak signal to connect to an EAP.

 

OTOH to restrict access for specific clients to a certain EAP you can add an unqiue SSID and use this for the clients in question.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
Recommended Solution
  2  
  2  
#2
Options
3 Reply
Re:MAC address filter per device-Solution
2020-08-21 23:34:12 - last edited 2020-11-23 09:21:15

@HKBlizzard,

 

you could set a RSSI Threshold in an EAP's configuration menu (under »Advanced« → »Load Balancing«) to avoid clients with a weak signal to connect to an EAP.

 

OTOH to restrict access for specific clients to a certain EAP you can add an unqiue SSID and use this for the clients in question.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
Recommended Solution
  2  
  2  
#2
Options
Re:MAC address filter per device
2020-08-23 10:38:10

@R1D2 

 

thanks for the tip. The trick with the RSSI Threshold solved the problem for me.

But what I don't understand is, why the device didn't connect to the more powerfull EAP by itself.

 

Now the device (Ring video doorbell 3) has an RSSI of -57dBm whereas it had an RSSI of -70dBm when it was connected to the other (wrong one) EAP.

  0  
  0  
#3
Options
Re:MAC address filter per device
2020-08-23 11:02:32 - last edited 2020-08-23 11:02:58

 

HKBlizzard wrote

But what I don't understand is, why the device didn't connect to the more powerfull EAP by itself.

 

That's something only the manufacturer of the doorbell can answer.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 3040

Replies: 3

Related Articles
Clients Cannot Connect to SSID with MAC FIlter
807 0
MAC filter only specify range (not complete MAC address)
423 0
ER605 Mac filter limits
612 0
Looking for router which can be updated more than 500 Mac address on Mac filter
435 0
Omada + EAP245 create WLAN with MAC Filter
4780 0
Wireless Network MAC Filter, filter a known MAC
313 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.