EAP225-Outdoor does not start with POE injector

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP225-Outdoor does not start with POE injector

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP225-Outdoor does not start with POE injector
EAP225-Outdoor does not start with POE injector
2020-08-22 18:17:18
Model: EAP225-Outdoor  
Hardware Version: V1
Firmware Version: unknown

HI all,

 

I just bought a new outdoor antenna.

But it does not start up, i do not see any light on the device and i cannot ping it.

To me it seems dead, but i just took it out of the box.

Is there something i can do to make it work.

I use the supplied POE injector and i can feel the antenna get a bit warm, but i do not see it give any sign of life.

Even the network is not activated (there are no lights blinking).

 

I tried the reset of the poe injector, use a other poe injector, restarted all parts several times without succes.

I do have a few other TP-link antenna's so i do know how it could work.

 

Is there a reset that might resolve this?

Thanks!

 

Barry

  0      
  0      
#1
Options
6 Reply
Re:EAP225-Outdoor does not start with POE injector
2020-08-22 19:10:54

@the-Barry, try to reset the EAP to factory defaults. Press the RESET button on the EAP225-Outdoor (not on the PoE adapter, this is a dead button) for 7-8 seconds until the LED flashes and indicates a reboot. If this works, the LED was probably disabled by someone else who got his hands on the EAP before it reached you.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options
Re:EAP225-Outdoor does not start with POE injector
2020-11-08 10:57:13

@the-Barry did you find the problem? I have the same with my device

  0  
  0  
#3
Options
Re:EAP225-Outdoor does not start with POE injector
2021-02-03 21:12:41 - last edited 2021-02-03 21:13:09

@the-Barry 

Hello. Any solution? Same happened to me too. 2 eap 225 indoor v3 and none turns on. tried each others poe injectors and nothing happened.

  0  
  0  
#4
Options
Re:EAP225-Outdoor does not start with POE injector
2021-02-03 21:33:21

@Lefi i turned it in and they switched it with a new one. So i didn't find a solution.

  0  
  0  
#5
Options
Re:EAP225-Outdoor does not start with POE injector
2021-02-03 21:49:30
Thanks for the answer. I noticed that the cable from the injector to the AP (poe) was Cat 5. I switched it to cat 5e and they worked just fine immediately. Cheers,
  0  
  0  
#6
Options
Re:EAP225-Outdoor does not start with POE injector
2021-02-03 21:54:43

@Lefi i tried several cat 5/cat5e/cat6 cables, multiple poe power supplies but didn't do the trick. Happy that its fixed with the cat5e cable! 

  0  
  0  
#7
Options