Hi,

I have two EAP235 wall plate and on both I can't get the POE OUT to work.

The EAP235 is connected to a POE injector IEEE 802.3at/af compliant max 30w.(Eminent EM4438) The EAP235 works fine but when I connect the other EAP235 to port three the second EAP doesn't power up. I swapped the POE injector for another one(TL-POE4824G), same result. I swapped the EAP to check if the problem persists on both EAP's. On both devices the POE OUT won't work.

I tried to the OC200 directly on the POE injector and it works. When I connect the OC200 to the POE OUT (port three) of the EAP the OC200 won't power up.

Is there any problem with those POE out ports on these EAP235 that anybody is aware of?

Thanks

Gilles