Business Community > All Threads > Why has my EAP Isolated and how can i fix it?
< All Threads

Why has my EAP Isolated and how can i fix it?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Why has my EAP Isolated and how can i fix it?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Why has my EAP Isolated and how can i fix it?
Why has my EAP Isolated and how can i fix it?
2021-05-20 09:09:04 - last edited 2022-09-14 07:03:58
Model: EAP225-Outdoor  
Hardware Version: V1
Firmware Version: 5.0.3

I'm using the Omada SDN Cloud, with compatible gateway, Switch, and several access points. However, since a few days back one of my access points has reported a status of "Isolated" and I can't seem to fix it. I have tried restarting everything, including the access point, and force re-provisioning but still seems stuck in that status. 

 

I've attached a picture, hoping someone here could help point me in the right direction?

 

 

Thanks

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Why has my EAP Isolated and how can i fix it?-Solution
2021-05-21 05:42:50 - last edited 2022-09-14 07:03:58

@Theuksbest 

Isolated equals to disconnected.

If this EAP supports Mesh feature, and it been adopted to the Controller before, and now disconnected from the network, the status will turn to isolated.

 

You should check the connection between this EAP and the front device.

Just striving to develop myself while helping others.
Recommended Solution
  15  
  15  
#3
Options
3 Reply
Re:Why has my EAP Isolated and how can i fix it?-Solution
2021-05-21 05:42:50 - last edited 2022-09-14 07:03:58

@Theuksbest 

Isolated equals to disconnected.

If this EAP supports Mesh feature, and it been adopted to the Controller before, and now disconnected from the network, the status will turn to isolated.

 

You should check the connection between this EAP and the front device.

Just striving to develop myself while helping others.
Recommended Solution
  15  
  15  
#3
Options
Re:Why has my EAP Isolated and how can i fix it?
2021-05-21 09:59:03

@Virgo thanks, that's really helpful.

 

I did some more testing and it was the broken cable connection, one of the pairs has a break in it. (Pin 6)

 

Is it possible to run the device off of two pairs, are there any pin out diagrams too if so?

 

its outdoor cable run so not so easy to simply change the cable.

 

thanks in advance 

  0  
  0  
#4
Options
Re:Why has my EAP Isolated and how can i fix it?
2021-05-24 16:22:18

@Theuksbest 

 

This is all I know about the pin...

EAP225-Outdoor supports 802.3af PoE or 24 V Passive PoE (+4,5 pins; -7,8 pins).

 

Not sure if you are using standard PoE or passive PoE.

 

On the 4. The Power supply mode of the PoE, you can see some info about the pin, but I'm not familiar with power things. Just for your information. lol

https://www.tp-link.com/us/support/faq/1003/ 

Just striving to develop myself while helping others.
  5  
  5  
#5
Options

Information

Helpful: 0

Views: 24180

Replies: 3

Related Articles
EAP isolated, with hardwire connection
735 0
EAP 660HD isolated
568 0
EAP 660 isolated no reason
712 0
AP IS HAVING MORE ISOLATED ISSUE
929 0
Isolated eap225 to lan
568 0
EAP Disconnected
2821 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.