Port Isolation TL-SG105E
I'd like to configure a Client Isolation .
Port 1: Internet access
Ports 2-4: Dispositives
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
You have to change the PVID for those ports.
- Copy Link
- Report Inappropriate Content
If you want to isolate the ports, you can set up VLAN for your network.
There are 4 ports, so you should use 4 different VLANs.
Port1, PVID1, VLAN1,2,3,4.5, to your Router. (untagged or tagged is up to your router, usually it's tagged.)
Port2, PVID2, VLAN1,2, untagged
Port3, PVID3, VLAN1,3. untagged
Port4, PVID4, VLAN1,4. untagged
Port5, PVID5, VLAN1,5. untagged
- Copy Link
- Report Inappropriate Content
Hi I do on this way, but doesn't works.
Computers oin ports 2 and 3 are communicating with each other.
I need thats communicate with internet (port1), but not one each other.
Whats I do wrong?
Internet is provided by a TL-R480T+
- Copy Link
- Report Inappropriate Content
You have to change the PVID for those ports.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1916
Replies: 4
Voters 0
No one has voted for it yet.