DHCP no ofert with ACL configuration switch TL-SG2428P
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
DHCP no ofert with ACL configuration switch TL-SG2428P
I am doing a configuration on a switch TL-SG2428P with ACL to prevent networks or vlans from communicating with each other.
the problem is that I need DHCP service in one of the vlan.
I did test configuring on the same switch - DHCP SERVER and it does not deliver IP.
then I tried configuring DHCP RELAY and it doesn't work either.
if I remove the ACL configuration the DHCP works and delivers IP.
I put the ACL again and DHCP no longer delivers IP.
Are there any settings for the ACL to include?
Thanks!!!
| Rule ID | S-IP | D-IP | IP Protocol | Action |
|
1
|
172.1.66.0
|
172.3.66.0
|
No Limit
|
Deny
|
|
2
|
172.3.66.0
|
172.1.66.0
|
No Limit
|
Deny
|
|
3
|
172.3.66.0
|
172.5.66.0
|
No Limit
|
Deny
|
|
4
|
172.5.66.0
|
172.3.66.0
|
No Limit
|
Deny
|
|
11
|
172.1.66.0
|
|
No Limit
|
Permit
|
|
12
|
172.3.66.0
|
|
No Limit
|
Permit
|
|
13
|
172.5.66.0
|
|
No Limit
|
Permit
|
