how to assign addresses to omada managed devices
how does one assign the address to the omada devices? i would like them to be at fixed loctions (i use a /24 for these device and prefer them to be static dhcp assignments)
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Make sure your firmware is up to date. Then choose config, vlan interface. Lastly hover over network name and click the edit button. Then you will be able to assign a IP address. Hope this helps!
- Copy Link
- Report Inappropriate Content
Go to Device--Click on one of your device, then go to "Config--IP Setting", then you can see the page for you to set up a static IP address.
- Copy Link
- Report Inappropriate Content
@John1234 i mean an omada switch or EAP, one cannot currently assign fixed addresses to OMADA devices under control of the controller.
- Copy Link
- Report Inappropriate Content
Make sure your firmware is up to date. Then choose config, vlan interface. Lastly hover over network name and click the edit button. Then you will be able to assign a IP address. Hope this helps!
- Copy Link
- Report Inappropriate Content
@warllo thanks!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1826
Replies: 4
Voters 0
No one has voted for it yet.