WAN2 always offline
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WAN2 always offline
I have the following working router 4g:
| Interface Name | Connection Type | Connection Status | IP Address | Subnet Mask | MAC Address | Default Gateway | Primary DNS |
|---|
| WAN1 | Dynamic IP | Link Up | 192.168.8.138 | 255.255.255.0 | 00-31-92-EA-21-E6 | 192.168.8.1 | 192.168.8.1 |
| WAN2 | Dynamic IP | Link Up | 192.168.1.101 | 255.255.255.0 | 00-31-92-EA-21-E7 | 192.168.1.1 | 192.168.1.1 |
connected to TL-R470T+ Load balance broadband router.
I set the load balancing in this way:
1) Network > Wan > Wan mod: 2
2) Transmission > Load balancing > Basic settings > Enable load balancing > Save;
3) Transmission > Load balancing > Link backup > nothing;
When i go to Transmission > Load balancing >Online detection i see:
| ID | Port | Port Status |
|---|
| 1 | WAN1 | Online | |
| 2 | WAN2 | Offline |
WAN2 is always off thoug i set other option in Load balancing section.
Why? Some ideas?
Thanks in advance.
R.
Re:WAN2 always offline
Do you have ping and DNS lookup to the DNS of WAN2 port, which will determine its status (online/offline):
If that doesn't help read through this thread.
If this was helpful click once on the arrow pointing upward.
If this solves your issue, click once the star to mark it as a "Recommended Solution".
