Business Community > All Threads > Suitable CPE for 2km Point to multi Point
< All Threads

Suitable CPE for 2km Point to multi Point

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Suitable CPE for 2km Point to multi Point

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Suitable CPE for 2km Point to multi Point
Suitable CPE for 2km Point to multi Point
2021-10-18 03:01:23 - last edited 2021-10-18 11:58:42
Model: CPE210  
Hardware Version:
Firmware Version:

Model : CPE210, CPE220, CPE510

 

I want to use one CPE (lets say C1) with 2 other Client CPE (lets say C2 and C3).

The distance between C1 to C2 and C1 to C3 is same and around 1.5-2 km. The distance between C2 to C3 is around 1.5-1.6 km. 


as far I did my research I think CPE210 can be used but from the website I saw that its optimized for more than 5km ( "System-level optimizations for more than 5km long range wireless transmission" ).

 

Which CPE will be the most suitable for 2 km distance ?

 

 If somebody could give some suggestion then it would be really helpful.

 

Thanks in advance !!

  0      
 
  0      
 
#1
Options
4 Reply
Re:Suitable CPE for 2km Point to multi Point
2021-10-19 07:23:15

@adarsh1783 I think you can use the CPE210. tplink's official website shows that the CPE210's transmission distance can reach 5km meaning that they can transmit up to 5km away, not that they can only transmit signals at a distance of 5km, and because of environmental interference, the CPE210's wireless transmission distance does not reach 5km, there will be attenuation.

  0  
  0  
#2
Options
Re:Suitable CPE for 2km Point to multi Point
2021-10-19 12:46:27

@Yannie what about horizontal bandwidth ? will CPE210 cover around 58 degree ?

  0  
  0  
#3
Options
Re:Suitable CPE for 2km Point to multi Point
2021-10-20 09:19:01

@adarsh1783 They have this data on their official website.

  0  
  0  
#4
Options
Re:Suitable CPE for 2km Point to multi Point
2021-10-20 13:39:14

@Yannie yeah, I saw that, but that is in theory and it could be old data too.

 

So the question is Will it cover 58 degree horizontal bandwidth practiacally ?

 

If someone has used or tested it recently then they can confirm on this.

 

Thanks

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 1181

Replies: 4

Related Articles
Point to Multi Point
985 0
CPE510 Point to Multi Point
4433 0
CPE 210 ACCES POINT AND CLIENT
1248 0
With CPE point-to-point, do I need a router on the client end, or does the client device do that?
409 0
CPE 510 multi point ion straight line
613 0
access point cpe 210 connection error
5008 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.