OC200 VLAN
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I want to get your help
I'm sorry it's hard to read by machine translation
Contents
OC200 cannot see oc200 from omada.tplinkcloud.com when VLAN is running
Is this the right thing to do or the wrong thing to do?
If it's wrong, I want to be able to see it
I want to get your help
environment
internet ← → router (home router) ← → L2switch (GSS116E) ← → TL-SG105PE ← → OC200 ← → AX3600
Contents
・Router is a home router
・Using the tag VLAN of GSS116E, the trunk port of GSS116E is connected to TL-SG105PE.
・When connecting to tagVLAN (trunkport), time has passed, the cloud lamp of OC200 is turned off, and it cannot be seen from omada.tplinkcloud.com.
・If you need to change the OC200 settings, where should you change them?
・Create and send a detailed diagram later
I want to solve it. Thank you
Thanks！
L2 switch tag VLAN enabled
omada.tplinkcloud.com/#controller STATUS OFFLINE
I can't connect with Cloud Access
OC200 "cloud" lamp goes out
laptop is
SSID_A(VLAN10:192.168.10.0/22)
SSID_B(VLAN20:192.168.20.0/24)
Connect to and watch the internet
I think that it is necessary to add or change the setting to OC200
if Cloud Access is not possible
