When creating a LAG LACP, I followed the steps from:

https://www.tp-link.com/us/support/faq/991/

Previously I performed a system reset.

Then went L2 Features>LAG>LACP Config /Global Config

I selected ports 23 and 24

Status =enable

Group ID = 1

Port Priority = 32768

Mode = Active

I pressed Apply.

As you can see on the "Lag table" page, the Lag was created but no member ports.
The LAG does not work!

Returning to "LACP Config /Global Config" 
I verifies that the ports are selected.



Possible bug?

Thank you for help.