Business Community > All Threads > CPE210 as Subscriber modem
< All Threads

CPE210 as Subscriber modem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CPE210 as Subscriber modem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE210 as Subscriber modem
CPE210 as Subscriber modem
2021-11-10 16:04:21 - last edited 2021-11-22 03:17:56

I have 2 locations with radios setup projecting 2.4GHz signal of course password protected using WPA2 and I want to see if I can take the PCE210 and connect to those radios. Distance is only about 500-1000 ft. I need an inexpensive solution as the radios in place were over a thousand each and buying 2 more of those is not reasonable. Will the CPE210 connect to a 2.4GHz radio signal that I am able to connect to using standard laptop wifi. I just want to make sure these work with other radios or are they setup to only work with another CPE210 or other TP Link product.

 

Thanks in advance,

 

Dee

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:CPE210 as Subscriber modem-Solution
2021-11-11 03:36:50 - last edited 2021-11-22 03:17:56

@DeeAbilene 

 

To my knowledge, the operating bands must match between CPE and radio, the communication is bidirectional, the CPE can receive the 2.4G radio's signal and the 2.4G radio should be transmit the data back.

Just striving to develop myself while helping others.
Recommended Solution
  1  
  1  
#2
Options
2 Reply
Re:CPE210 as Subscriber modem-Solution
2021-11-11 03:36:50 - last edited 2021-11-22 03:17:56

@DeeAbilene 

 

To my knowledge, the operating bands must match between CPE and radio, the communication is bidirectional, the CPE can receive the 2.4G radio's signal and the 2.4G radio should be transmit the data back.

Just striving to develop myself while helping others.
Recommended Solution
  1  
  1  
#2
Options
Re:CPE210 as Subscriber modem
2021-11-29 17:54:05

I have since purchased one of these radios and tested it, they do indeed work perfectly with our existing business class high end radios. I attached this radio to a Vantage Pegasus dual band on the 2.4GHz side while the 5.8GHz side is feeding network to the whole site. I would highly recommend this product for versatility and ease of use.

  2  
  2  
#3
Options

Information

Helpful: 0

Views: 436

Replies: 2

Related Articles
Help connecting CPE210 to modem
1397 0
cpe210 not working
2173 0
Connecting 2 cpe210 ap and client. and ap to modem
1494 0
cpe 210 client fail to connect to cpe210 AP
967 0
CPE210
533 0
Cpe210
2270 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.