How many CPEs can connect to CPE510 in WISP mode and in standalone mode no Pharos?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How many CPEs can connect to CPE510 in WISP mode and in standalone mode no Pharos?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How many CPEs can connect to CPE510 in WISP mode and in standalone mode no Pharos?
How many CPEs can connect to CPE510 in WISP mode and in standalone mode no Pharos?
2021-12-06 12:20:58 - last edited 2021-12-07 15:02:37
Model: CPE510  
Hardware Version:
Firmware Version:

Guys please help, How many CPEs 510 can connect to main  CPE510 in WISP mode and in standalone mode no Pharos software? 

 

 

I appreciate your response in advance 

  0      
  0      
#1
Options
1 Accepted Solution
Re:How many CPEs can connect to CPE510 in WISP mode and in standalone mode no Pharos? -Solution
2021-12-07 09:48:26 - last edited 2021-12-07 15:02:37

@Ser 

 

I guess you wanna use the first CPE1 as the WISP Mode, and connect another CPE2 to this CPE1 with the cable, and then wanna know how many CPEs can be connected to this CPE2?

 

As I known, if you enable the Maxtream function, then the maximum is 50 CPEs.

If you keep the Maxtream function disabled, then the maximum is 20 CPEs.

 

But CPE510's wireless signal is mainly focused on its front panel and has a very limited 60 degree angle, so you'd better set those CPEs in this angle.

Just striving to develop myself while helping others.
Recommended Solution
  1  
  1  
#2
Options
4 Reply
Re:How many CPEs can connect to CPE510 in WISP mode and in standalone mode no Pharos? -Solution
2021-12-07 09:48:26 - last edited 2021-12-07 15:02:37

@Ser 

 

I guess you wanna use the first CPE1 as the WISP Mode, and connect another CPE2 to this CPE1 with the cable, and then wanna know how many CPEs can be connected to this CPE2?

 

As I known, if you enable the Maxtream function, then the maximum is 50 CPEs.

If you keep the Maxtream function disabled, then the maximum is 20 CPEs.

 

But CPE510's wireless signal is mainly focused on its front panel and has a very limited 60 degree angle, so you'd better set those CPEs in this angle.

Just striving to develop myself while helping others.
Recommended Solution
  1  
  1  
#2
Options
Re:How many CPEs can connect to CPE510 in WISP mode and in standalone mode no Pharos?
2021-12-07 15:02:26

@Virgo 

 

I mean  wirelessly, anyway i get it. 

60°  only? Do you recommend any other device that can cover 120°?

 

 

Thanks for your response and i appreciate it.

  0  
  0  
#3
Options
Re:How many CPEs can connect to CPE510 in WISP mode and in standalone mode no Pharos?
2021-12-08 04:58:33

@Ser 

 

As far as I know, tplink's CPE products all seem to have directional antennas at 60 angles, while their EAP outdoor products have omnidirectional antennas, but they are not as suitable for long distance data transmission as CPE, so it still depends on your own practical needs.

 

This is for you: https://www.tp-link.com/en/business-networking/omada-eap/#outdoor-ap

 

Just striving to develop myself while helping others.
  1  
  1  
#4
Options
Re:How many CPEs can connect to CPE510 in WISP mode and in standalone mode no Pharos?
2021-12-10 18:29:45

@Virgo 

Thank you so much for your explanation,❤️

 

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 1136

Replies: 4

Related Articles