Dear @Liandri ,

Liandri wrote

I have few network in my setup like :

• 10.10.10.0/24 as default network VLAN10,
• 10.10.20.0/24 for some servers VLAN20,
• 10.10.30.0/24 for isolated devices VLAN30,

If i setup an OpenVPN server on my OC300 with ER7206 as router, i can only see 10.10.10.0 computers on default network, but i need to use OpenVPN to only see 10.10.30.0 network.

If i activate this network in the "Local Networks" available in the OpenVPN config page i can ping the GW only (10.10.30.1), but can't ping any other computer on this network.

Any solution please?

Can you see the tunnel created successfully?

You may try to turn off the firewall and anti-virus software application to test.

And what exactly the VPN clients are.

Best Regards!