NAT with ER605
Hello,
i just bought an ER605 NAT router with the purpose to use it as a NAT, basically i need it to isolate machines from two separate private networks.
Here is an example of what i'm trying to achieve :
Those are my two machines each in its own private network
PC1 - 192.168.11.1 - NETWORK 1
PC2 - 192.168.22.2 - NETWORK 2
What i need is to create an alias of both of the machines in each of the private networks
PC1 - 192.168.11.1 - NETWORK 1 <--> ROUTER <--> PC2 - 192.168.22.2 - NETWORK 2
PC2ALIAS - 192.168.11.2 - NETWORK 1 <--> performing NAT <--> PC1ALIAS - 192.168.22.1 - NETWORK 2
So PC1 will be able to reach PC2 by using the PC2ALIAS, and the same for PC2 accessing PC1 with PC1ALIAS.
This can be early done with iptables rules putting a linux PC as a router, but i struggle a lot to find the right configuration for the ER605 (it looks like the NAT function it's not a NAT at all, it just adds a public address).
Is that configuration possible at all?
Thanks for your support!
Marco