Business Community > All Threads > TL-POE150S V4 green led is blinking, no power on device
< All Threads

TL-POE150S V4 green led is blinking, no power on device

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-POE150S V4 green led is blinking, no power on device

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-POE150S V4 green led is blinking, no power on device
TL-POE150S V4 green led is blinking, no power on device
2022-01-13 17:36:45
Model: Adapter  
Hardware Version: V4
Firmware Version:

i have a TL-POE150S V4 connected to a Mitel IP phone 5330. it has worked fine for a good while, but now the green light flashes on the POE and the phone gets no power. 

I have tried a new TL-POE150S V4, but same issue

I have changed both UTP cat 5 cable (in and out), but no effect. 

i have replaced the phone, but same issue. 

 

can anyone help?

  0      
 
  0      
 
#1
Options
1 Reply
Re:TL-POE150S V4 green led is blinking, no power on device
2022-01-14 09:16:33

@Indifat 

 

If the light on the device is flashing, it means that it is not connected to PD or the power supply is abnormal, you can switch to another PoE Adapter to power up your phone and see if the phone works properly.


If the phone works fine, then the POE150S is faulty. And suggest contacting support directly to solve the problem.

Just striving to develop myself while helping others.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 3045

Replies: 1

Related Articles
TL-SG105E V4, blinking power led
1905 0
EAP120 with TL-POE150S Power injector
1085 0
EAP 225 Outdoor PoE injector Green Blinking LED
781 0
Port 8 led blinking Green slowly 5sec intervals
421 1
TL-POE150S does not show a detection signal
399 0
TL-POE150S Compatibility
1710 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.