in OMADA > Clients, no data for 3 columns ACTIVITY SPEED DOWNLOAD UPLOAD
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello! There is no data on 3 columns( 0 Bytes / s 0 Bytes 0 Bytes) in the OMADA controller, 1 computer is connected, it is the main computer, WAN standard.
I would be grateful if you know how to solve my question.
mdlttms
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Does restarting the PC and controller not help either?
Do other devices besides this PC have the same problem?
If so, I've seen similar posts before：https://community.tp-link.com/en/business/forum/topic/520712
The ER605 has a feature called hardware offload, you can check if you have it on your ER7206 and disable it to test.
- Copy Link
- Report Inappropriate Content
Do you mean the three columns ACTIVITY SPEED, DOWNLOAD, UPLOAD?
I've observed that they don't seem to be live data, the page refreshes itself about once every two minutes.
When you connect the PC to the controller, it shows all three columns as 0 in the client list at the beginning?
And the same result after waiting for a while?
What about the version of your controller?
- Copy Link
- Report Inappropriate Content
@Virgo Hello!
"Do you mean the three columns ACTIVITY SPEED, DOWNLOAD, UPLOAD?" >> Yes
"I've observed that they don't seem to be live data, the page refreshes itself about once every two minutes." >> No, data view -0
"When you connect the PC to the controller, it shows all three columns as 0 in the client list at the beginning?:" >> Yes . it show 0
"And the same result after waiting for a while?" >> Yes, still the same 0
"What about the version of your controller?" >> v 5.0.15
- Copy Link
- Report Inappropriate Content
Does restarting the PC and controller not help either?
Do other devices besides this PC have the same problem?
If so, I've seen similar posts before：https://community.tp-link.com/en/business/forum/topic/520712
The ER605 has a feature called hardware offload, you can check if you have it on your ER7206 and disable it to test.
- Copy Link
- Report Inappropriate Content
@Virgo Hello!
"Does restarting the PC and controller not help either?
Do other devices besides this PC have the same problem?" Yes
"
If so, I've seen similar posts before：https://community.tp-link.com/en/business/forum/topic/520712
The ER605 has a feature called hardware offload, you can check if you have it on your ER7206 and disable it to test." >> Ok i try it, thank you!
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 843
Replies: 5
Voters 0
No one has voted for it yet.