DHCP Relay on Omada

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

DHCP Relay on Omada

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
DHCP Relay on Omada
DHCP Relay on Omada
2022-01-24 20:41:27 - last edited 2022-01-25 03:17:09
Model: ER605 (TL-R605)  
Hardware Version: V1
Firmware Version: 1.1.1

Omada version is 5.1.30

 

I have and ER605, with a SP2008P atttached.

 

I have a DHCP server set up on Windows, and each of the subnets matchihing the VLANS has been set  up.  this server is on VLAN 1

 

I have defined 4 new VLANs, 10, 20, 30m 50

Existing VLAN is 1

 

In the VLAN definition, I made sure to select the port where the SP2008P is attached.

I also defined the legal DHCP servers.

 

I then enable the port on the Sp2008P that I have a test PC attached to, and selcted the VLAN 30 VLAN

 

 

1. When I start the connection with DHCP on the test workstation, it does not get an address.

2. If I define a static IP (192.168.30.100) it works

 

 

I would expect, in defining the legal DHCP servers, that it would set up the relay from those servers to the subnet.

 

What am I missing?

 

 

 

  0      
  0      
#1
Options
3 Reply
Re:DHCP Relay on Omada
2022-01-25 05:55:26

@jwaltrip 

IMHO: ER605 does not support the DHCP relay. 

Do you mean the DHCP relay on your SG2008P? 

 

https://community.tp-link.com/en/business/forum/topic/277522

  0  
  0  
#2
Options
Re:DHCP Relay on Omada
2022-01-25 18:34:00

Not 100% sure that is correct.  But not clear on it.

I probably need to wait until I replace the switch with Omada compat where the DHCP server is.  then I can test.

  0  
  0  
#3
Options
Re:DHCP Relay on Omada
2022-02-11 19:45:34

If Anyone is interested, with tech supported help this is working.  I can pist the results

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1617

Replies: 3

Related Articles