@acyhn 

When you create VLAN100 AND 200, you select the tagged ports. e.g. Profile VLAN100, scroll down and find 1-4, select them. 

Create VLAN200, you select port #1-4. 

After you save the config, #1-4 are tagged ports with (trunk)VLAN100 and 200. 

PVID is for untagged packets. For untagged ports, you can only set one PVID to get packets from the matching VLAN(PVID)

@John1234 thank you very much for response;

i want to do

as in the picture;

How do I do the operation on port1? (swich)

@acyhn 

I assume you have setup VLAN 1, 100 and 200.

In the VLAN list, click edit VLAN1.

Select Ports 1 to 11 and 16 to 20 as untagged member of VLAN1

In the VLAN list, click edit VLAN 100.

Select Ports 21 to 24 as untagged member of VLAN 100

Select port 1 as tagged member of VLAN 100

In the VLAN list, click edit VLAN 200.

Select Ports 11 to 15 as untagged member of VLAN 200

Select port 1 as tagged member of VLAN 200

Above the VLAN list click port config

Set PVID of ports 1 to 11 and 16 to 20 to 1

Set PVID of ports 21 to 24 to 100

Set PVID of ports 11 to 15 to 200

Should work now.

Kind regards

Martin