Business Community > All Threads > NVR1008H cannot configure Line Crossing event, but can configure it in Security Manager
< All Threads

NVR1008H cannot configure Line Crossing event, but can configure it in Security Manager

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

NVR1008H cannot configure Line Crossing event, but can configure it in Security Manager

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
NVR1008H cannot configure Line Crossing event, but can configure it in Security Manager
NVR1008H cannot configure Line Crossing event, but can configure it in Security Manager
2022-03-15 22:32:19 - last edited 2024-09-19 08:20:43
Model: VIGI NVR1008H   VIGI C300P  
Hardware Version: V1
Firmware Version: 1.0.5 Build 210823 Rel.61765n

I have a VIGI C300 camera which records on my NVR1008H.  I can configure Line Crossing events using the Security Manager on my computer, but this option is not available from the NVR.  I get a popup saying 'Unavailable for all channels' and when I try and select a channel the popup only has 'No channels can...'.

Why does this happen?

How can I configure line crossing for people only in this configuration?

 

I am currently getting way too many false positives for motion detection especially on windy days where the shadows from nearby trees are moving across the field of view.  My proposed approach is to turn down the sensitivity of motion detection to its minimum, and use line crossing to activate events.  Is this going to work?

 

  0      
 
  0      
 
#1
Options
3 Reply
Re:NVR1008H cannot configure Line Crossing event, but can configure it in Security Manager
2022-03-16 03:29:43 - last edited 2024-09-19 08:20:21

  @VaughanR 

Have you checked your camera? Is that showing up properly on the channel page on your NVR? 

Have you tried to power cycle NVR and cameras? Checked the cables? All working good?

 

  0  
  0  
#2
Options
Re:NVR1008H cannot configure Line Crossing event, but can configure it in Security Manager
2022-03-16 04:53:16 - last edited 2024-09-19 08:20:21

  @John1234 

 

Thanks John, everything is working OK, but somethings can be configured through Security Manager (SM) on my computer but not through the NVR.
I would suspect that the mapping of the camera functionality in the SM is not the same as in the NVR.  I also presume that the camera has some motion detection/line crossing functionality builtin and so does the NVR; so which is used, when??

  0  
  0  
#3
Options
Re:NVR1008H cannot configure Line Crossing event, but can configure it in Security Manager
2022-03-16 09:27:45 - last edited 2024-09-19 08:20:21

  @VaughanR 

Have you referred to the User Guide page 98. If possible, reset the camera and try to mange it again on the SM. Any luck? Should be the same

https://static.tp-link.com/2021/202103/20210331/1910013008_Network%20Video%20Recorder%20User%20Guide.pdf

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 800

Replies: 3

Related Articles
Line Crossing Record
411 0
Cannot configure new AP
290 0
ER707-M2 cannot login to gateway (first configuration)
2531 0
Cannot configure the [Port COnfig] under PoE tab for TL-SG105PE V1
1302 0
Cannot Access my Range Extender Configuration (EAP120)
856 0
Cannot configure new EAP-235 wall
557 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.