Adopting EAP from internet via OC200 with cloud connection
Hi,
i've been wondering if i can adopt the EAP245 using OC200 with cloud connection?
Example.
House A - OC200 with cloud access and with multiple EAPs
House B - with EAPs without controller
Is it a cloud based controller or is it the inform url and how can i know what is my inform url ?
Thanks!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
You don't need a cloud-based controller, since you already have OC200.
The solution is, on the OC200 site's Router, open port 29810-29814 for the controller IP.
On the EAP management page(like your screenshot), put in the OC200 site Router's public IP.
Here is an example you may refer to:
https://www.tp-link.com/us/support/faq/2763/
- Copy Link
- Report Inappropriate Content
You don't need a cloud-based controller, since you already have OC200.
The solution is, on the OC200 site's Router, open port 29810-29814 for the controller IP.
On the EAP management page(like your screenshot), put in the OC200 site Router's public IP.
Here is an example you may refer to:
https://www.tp-link.com/us/support/faq/2763/
- Copy Link
- Report Inappropriate Content
Hi @Somnus ,
I already did the setup but im getting failed to adopt.
Device adoption failed because the device does not respond to adopt commands.
destination ip: my controller ip address.
inform url : my router wan ip
Thanks
- Copy Link
- Report Inappropriate Content
My mistake. I gave you the wrong port number. It should be 29810-29814.
I Edit my answer and correct it.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 560
Replies: 3