Acessing web ui of AP connected to WAN port

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Acessing web ui of AP connected to WAN port

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ZdenekM

2022-07-30 10:12:22 - last edited 2022-07-30 12:32:39

Posts: 46

Helpful: 11

Solutions: 0

Stories: 0

Registered: 2021-02-26

Acessing web ui of AP connected to WAN port

2022-07-30 10:12:22 - last edited 2022-07-30 12:32:39

Model: ER605 (TL-R605)

Hardware Version: V1

Firmware Version: 1.2.1

I've been using Omada for a while but haven't so far explored advanced features, so sorry in advance for probably silly question... I connected my old AP to port 2 of my TL-R605, which is set as WAN/LAN1 (which will serve as a backup). The AP provides DHCP, the WAN port gets the IP address... So far, so good. But I would like to be able to connect to AP's web UI from my LAN - is it possible somehow? Like e.g., to map IP/port from WAN to some port on the gateway?

1 Accepted Solution

Alex789

LV3

2022-07-30 11:57:33 - last edited 2022-07-30 12:32:39

Posts: 112

Helpful: 61

Solutions: 9

Stories: 0

Registered: 2022-06-30

Re:Acessing web ui of AP connected to WAN port-Solution

2022-07-30 11:57:33 - last edited 2022-07-30 12:32:39

@ZdenekM You should be able to freely connect to things outside your firewall.

You should automatically getting routes to the IPs directly connected to your WAN ports.

How are you trying to connect to the AP and what happens when you try?

Information

Helpful: 0

Replies: 2

Acessing web ui of AP connected to WAN port

Acessing web ui of AP connected to WAN port

Information

Voters 0

Tags