Add VLAN/PVID settings in controller (controller mode)
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
we wanted to exchange our old network infrastructure for a new one to simplify the administration. Now we had to realize that basic things are not possible with the controller and we have to decide to stay with the old hardware or to use the new TP-Link hardware in standalone mode. Which then does not speak for simplification
Full Details: https://community.tp-link.com/en/business/forum/topic/583476?replyId=1136014&utm_source=Subscription&utm_medium=email
Setup:
- 1x TP-Link OC200 Omada
- 1x ER7206
- 2x TL-SG3428
- 1x TP-Link TL-SX3016F 16-Port 10GE
Sugestion:
Add settings to controller mode to allow untag VLAN/PVID from the router ports. In controller mode, we cannot modify the router port PVID, and it is always in VLAN1 default VLAN for all ports. For security reasons this basic setting should actually be a must to implement. Because from my point of view, separating the traffic already in the router is in some cases safer and easier than doing it over the switch via ACL.
Please let me know if this is possible and in which timeline. If this is not possible in the near future, I will have to look for another solution or hardware setup.
Thanks in advanced
