WLAN Schedule DOES NOT WORK RELIABLY
The WLAN scheduling feature does NOT WORK RELIABLY.
Some time it works, sometimes it doesn't !!!
Very frustrating that you can't rely on implemented functionality to just work.
Here is my equipment and version numbers :
Router is running the 20220902 beta
Switch is running the 22020909 beta
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I haven't found any problems with my WLAN Schedule so far.
Did this function start working reliably after the upgrade?
Does it work properly if you reset it once?
Are there regular times when it doesn't work?
- Copy Link
- Report Inappropriate Content
I have it set to turn off every wifi radio from Sunday - Thursday from 700pm - 930pm.
As an example, It didn't work this past Sunday or Monday but worked last night.
Not sure what you mean by reset it ? I have power cycled all devices since implementing the schedule (which I only started using approx. 3 weeks ago). The firmware on all devices haven't changed since being implemented (albeit I went from the router 9022 beta to the 1015 beta but revert back to 9022 on the same day).
I wasn't keeping track of when it wasn't working in the beginning as I went through the usual troubleshooting steps (including checking the date / time on controller and router) but each week there was at least one day it didn't work.
- Copy Link
- Report Inappropriate Content
It is likely that something has triggered the controller to not send the full configuration, try forget EAP, re-adopt EAP and test again.
- Copy Link
- Report Inappropriate Content
Thanks for the suggestion. I will try that next time the issue occurs.
It worked again last night so I'm afraid to play with it right now.
It would be nice if TP-Link could point me to logs I might be able to look at for clues. There are no errors or warnings showing up in the controller logs.
- Copy Link
- Report Inappropriate Content
Knock on wood.... it's been working as expected since my last posting.
I ugpraded to linux omada controller 5.7.4 yesterday and rebooted all equipment after the upgrade.
I'll post a reply if the issue manifests again.
- Copy Link
- Report Inappropriate Content
Spoke to soon....
It didn't work again today.
Sigh 😔
- Copy Link
- Report Inappropriate Content
Dear @TandS ,
Thank you so much for taking the time to post the issue on TP-Link community!
To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue.
The ticket ID is TKID221137546, please check your email box and ensure the support email is well received. Thanks!
Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.
Many thanks for your great cooperation and patience!
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 979
Replies: 8
Voters 0
No one has voted for it yet.