Omada Controller with external DHCP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Omada Controller with external DHCP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Omada Controller with external DHCP
Omada Controller with external DHCP
2023-01-06 18:32:10 - last edited 2023-01-13 17:37:19

Hi all,

we are using a Sophos XGS (192.168.2.252) with a configured DHCP Server (192.168.2.100-192.168.2.200). Since we are not satisfied with the Sophos access points we would maybe switch to the Omada controller.

 

I have installed it for testing. The controllers ip address is 192.168.2.23. Before we now buy AP's I would like to clarify how the configuration must look.

 

Maybe?

 

 

We do not want to use VLANs

 

Thanks a lot :)

  0      
  0      
#1
Options
1 Accepted Solution
Re:Omada Controller with external DHCP-Solution
2023-01-13 17:37:13 - last edited 2023-01-13 17:37:19

  

So a little feedback.

 

I have already given myself the solution. It works if you only use access points just as you can see from the screenshot.

 

The access points and the clients get an IP from the external DHCP server.

Recommended Solution
  0  
  0  
#6
Options
5 Reply
Re:Omada Controller with external DHCP
2023-01-07 10:50:16

  @Moinsen0815 I think an Omada compatible Gateway is required for this. Wait for other responses but I asked a similar question before and that is the answer I received.

  0  
  0  
#2
Options
Re:Omada Controller with external DHCP
2023-01-07 14:52:33

Moinsen0815 wrote

Hi all,

we are using a Sophos XGS (192.168.2.252) with a configured DHCP Server (192.168.2.100-192.168.2.200). Since we are not satisfied with the Sophos access points we would maybe switch to the Omada controller.

 

I have installed it for testing. The controllers ip address is 192.168.2.23. Before we now buy AP's I would like to clarify how the configuration must look.

 

Maybe?

 

 

We do not want to use VLANs

 

Thanks a lot :)

  @Moinsen0815 

The Omada controller will work perfectly well in conjunction with the Sophos appliance but will not control the Sophos.  All that is needed is to set up wireless networks within the controller which will be on the prime LAN from the Sophos box.  Done this perfectly well using Draytek routers/firewalls & OC200 controllers as well as software controllers running on PC's & as Docker app within a NAS. 

 

Hope this points you in the right direction.

 

  2  
  2  
#3
Options
Re:Omada Controller with external DHCP
2023-01-07 15:11:59

  @GaelForce Thanks a lot. I think i will try that. If i should have still problems maybe i can contact you by PM ?

 

  0  
  0  
#4
Options
Re:Omada Controller with external DHCP
2023-01-09 05:12:09

  @Moinsen0815 

 

Why PM? We are all here ready to share the experience XD

  3  
  3  
#5
Options
Re:Omada Controller with external DHCP-Solution
2023-01-13 17:37:13 - last edited 2023-01-13 17:37:19

  

So a little feedback.

 

I have already given myself the solution. It works if you only use access points just as you can see from the screenshot.

 

The access points and the clients get an IP from the external DHCP server.

Recommended Solution
  0  
  0  
#6
Options