Problem: Cannot see log from switch in omada controller

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Problem: Cannot see log from switch in omada controller

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Problem: Cannot see log from switch in omada controller
Problem: Cannot see log from switch in omada controller
2023-02-20 15:17:06
Model: TL-SG3452X  
Hardware Version: V1
Firmware Version: 1.0.1

Hello,

 

I recently bought 5 TL-SG3452X switches and 6 SFP+ modules TL-SM5110-LR(UN). Before setting up the omada controller, I saw logs in each switch recording disconnection/connection of sfp+ modules. Now I can't find it in the omada controller logs/events. The frequent outages are probably caused by the fact that I use old SC/LC patch cables there. I have already ordered a new one, but I would like to monitor connection failures of modules/fibres on the omada controller just as I monitored them when I tested the switches separately, without the controller. Is there a chance to enable this kind of logs/events to be monitored in omada controller?

 

Thakn You

 

Best Regards

Dalibor

  0      
  0      
#1
Options
1 Reply
Re:Problem: Cannot see log from switch in omada controller
2023-02-22 07:57:29

  @oqix 

 

As I know, the SFP port connected/disconnected information couldn't be shown in the log on the controller.

If you wanna check it, you can use SNMP or SSH.

Just striving to develop myself while helping others.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 384

Replies: 1

Related Articles