Hello,

I have a TL-SG1016PE and I am struggling with the VLANs.
Any equipment that connects behind the ports and accepts 802.1q works without problems.
I use ports 1 to 8 for AP's with vlan 100, 101, 200, 201 and 202.
I use port 9 and 10 to link to other switches with 802.1q and it works.
Ports 15-16 go against the router by a LAG.
And ports 10 to 14 that should only be accessed by vlan 100 without tagging. I can't get them to work.

The configuration is:
VLAN1: not used, Not Member all ports
VLAN100: tagged 1-10, 15-16 untagged 11-14
VLAN101,200-202: tagged 1-10, 15-16 Not member: 11-14

in conclusion, ports 11 to 14 do not have connectivity

I use one TL-SG108E with the same issue, I will connect with a one port of TL-SG1016PE and put deterrents vlan's in mode untagged depending on the network required.

thank you!!