Omada controller 5.x.x DTIM setting?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Omada controller 5.x.x DTIM setting?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Omada controller 5.x.x DTIM setting?
Omada controller 5.x.x DTIM setting?
2023-05-17 20:49:11
Model: OC200  
Hardware Version:
Firmware Version:

We have a number of Omada WiFi networks under our management, most all are using OC200 controllers.  For one client they are having a very high amount of association timeout errors.  I've read that adjusting the DTIM from 1 to 3 can often help with this.

However, I am not able to find this setting under the 5.x.x version of the controller.  I've looked everywhere- and focused on the Advanced settings under Edit Wireless Network (which is where the TP-Link FAQ says it should be).  

I've looked at both the local web gui for the OC200 as well as through the Omada Cloud management.  The controller in question is running 5.7.6 but I've also looked at other controllers running 5.0.30.  Neither have a DTIM option.

Was this removed in the 5.x version of the OC200 fimware?  Or is it located somewhere else that I haven't been able to find?

  1      
  1      
#1
Options
2 Reply
Re:Omada controller 5.x.x DTIM setting?
2023-05-17 21:11:24

BTW, I did notice that the controllers were fairly out of date so I've updated them to 5.9.32.

That said, I'm still not able to locate the DTIM settings under this current version as well. 

  1  
  1  
#2
Options
Re:Omada controller 5.x.x DTIM setting?
2023-05-18 10:09:09

  @PathfinderNet 

 

If ignore the DTIM, have you followed this to do any TS?

Just striving to develop myself while helping others.
  0  
  0  
#3
Options

Information

Helpful: 1

Views: 831

Replies: 2

Related Articles