EAP610 weak signal at short distances on 5.5 and 2.4 GHz

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP610 weak signal at short distances on 5.5 and 2.4 GHz

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP610 weak signal at short distances on 5.5 and 2.4 GHz
EAP610 weak signal at short distances on 5.5 and 2.4 GHz
2023-07-22 12:10:43
Model: EAP610  
Hardware Version: V3
Firmware Version: 1.3.2 Build 20230414 Rel. 54437(4555)

Hello everyone,

 

I recently purchased an EAP610 and noticed that the WiFi signal drops out at short distances from the device - at a distance of 12m (5.5GHz) and 10m (2.4GHz) there is no signal at all. The speed measured on 5.5GHz at a distance of 10cm from the device is about 350Gbps, and at a distance of about 5m about 120Gps.

 

Settings are shown in the pictured down below:


Thank you for all replies!

  0      
  0      
#1
Options
1 Reply
Re:EAP610 weak signal at short distances on 5.5 and 2.4 GHz
2023-07-24 06:38:15

  @karix02 

 

Hi, indoor EAPs has the 15-20m of wifi radius coverage recommend distance, is there any obstacles between EAP610 and client devices?

Tried resetting the EAPs and use the default wifi to test if it still has the 10m wifi signal.

Just striving to develop myself while helping others.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 550

Replies: 1

Related Articles