Syslog traffic coming directly from access point. Can't find setting.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Syslog traffic coming directly from access point. Can't find setting.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Syslog traffic coming directly from access point. Can't find setting.
Syslog traffic coming directly from access point. Can't find setting.
2023-08-15 14:14:41 - last edited 2023-08-15 14:31:47
Model: EAP660 HD  
Hardware Version: V1
Firmware Version: Omada controller 5.12.2

My AP is sending syslog data and I can't find where this is configured.


The logging is coming directly from the access point and sending logs that look like this:

 

[1692107180.712399588] AP MAC=DE:AD:BE:EF:DE:AD MAC SRC=11:22:33:44:55:66 IP SRC=10.0.0.1 IP DST=10.0.0.2 IP proto=6 SPT=123 DPT=51186


I've restarted the access point and it does stop while it's rebooting, but continues immediately after. I can't find anything for remote logging/syslog other than Settings -> Site -> Remote logging in the Omada Controller, which is disabled. According to the tooltip, this is only for sending logs from the Omada controller anyway, so it wouldn't explain what's coming directly from the AP.


Anyone know where I might have enabled syslog other than in remote logging? It's probably something I set up at one point, but I can't find the setting.The AP is adopted and not running in standalone.

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Syslog traffic coming directly from access point. Can't find setting.-Solution
2023-08-15 14:27:23 - last edited 2023-08-15 14:27:25

Of course I figured out how to stop it after posting this.

 

I applied some arbitrary settings (unchecked advanced features, hit save, checked and hit save again) and now syslog traffic isn't forwarding. Looks I just needed to change something that would reapply the profile.

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Syslog traffic coming directly from access point. Can't find setting.-Solution
2023-08-15 14:27:23 - last edited 2023-08-15 14:27:25

Of course I figured out how to stop it after posting this.

 

I applied some arbitrary settings (unchecked advanced features, hit save, checked and hit save again) and now syslog traffic isn't forwarding. Looks I just needed to change something that would reapply the profile.

Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 450

Replies: 1

Related Articles