TL-R470T+ when used makes my internet slow or no internet connection at all
TL-R470T+ when used makes my internet slow or no internet connection at all
Hi,
I am using 2 isp - pldt and globe.. . it used to work before but now its sort like having a problem by itself....
version - 6.0.4 Build 20200313 Rel.32850
wan1 - pldt - 600mbps
wan2 - globe - 600mbps
loadbalance - enabled
failover when wan1 is out and will use wan2
wan/lan3 - used to connect to 24pcs unmanaged switch
wan/lan4 - used to connect to 16pcs unmanaged switch
lan5 - connceted to main pc where all admin access is being monitored...
the net goes slow ...... it cant even load the youtube in my admin pc..... i dont know if its the system itself clogged up or so .... dymanic ip is enable for both also ....
but when i make it a direct connection without the load balancer... everything is so fine ..... and even using wifi is so fine.... its just when using this load balancer making internet slow or having no internet at all detected even if the admin dashboard syas the links are up ....
what should i do ?
system log says - its has dhcp service issue problems
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
My guess is that you have ISP supplied modem/routers in front of the ER605 which use NAT and are supplying private addresses to the ER605 via dhcp. You need to talk to your isp to see how it is possible for the Er605 to obtain a public ip, typically by switching their modem into bridge mode. I ve not even heard of the isps you use so know nothing about them or their equipmentI. I suspect you are in a different country
- Copy Link
- Report Inappropriate Content
@MisterW , I am using globe and pldt .. and I am from Philippines.
Wan 1 - PLDT - 600MBPS
Wan 2 - Globe - 600MBPS
If I enable backup link, is WAN2 automatically "DISCONNCTED" - and activated only when wan1 fails?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
If you are connected to other routers just go to management pages and assign two WAN ports with different IP address.
- Copy Link
- Report Inappropriate Content
@Loycelover- so I will choose static IP then ....
Is there anyway you could control my PC and see settings...
- Copy Link
- Report Inappropriate Content
Well I'm not capable of doing this, if you wanna solve this urgently and need remote session for help you can just contact the official technical support and they will handle this.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1727
Replies: 17
Voters 0
No one has voted for it yet.