VMWare Uplinks
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
I have problem with connecting ESXi Host with 2 NICs on TL-SG3452XP.
On switch is 2 ports tagged 2 VLANs configured. On ESXi one vSwitch with both NICs and IP Hash configured.
I have 2 port groups one VLAN4 (for VMs) and VLAN50 for management. This working only with one cable.
I configured static LAG with hash algorithm SRC IP+DST IP
It working with one cable but not with 2.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Any topology available? Do you mean the LAG settings can work properly when only one cable is connected between tplink switch and vswitch but won't work when there's more cable?
- Copy Link
- Report Inappropriate Content
@KimcheeGUN : Sorry for delay. I use VMWare ESXI Free 8.0. Intel Ethernet Controller 10G X550
- Copy Link
- Report Inappropriate Content
@Loycelover- Yes. Correct.
- Copy Link
- Report Inappropriate Content
Could you please tell me what exactly do you mean by not working with 2 cables? Is it the uplink speed of ports still remains the same as original or just dropped?
- Copy Link
- Report Inappropriate Content
Wait... so from my understanding IF you want LAG ports, You will need VMware Server to enable that feature on your ESXI host.
You will need to full enterprise ESXI License and not the free License.
- Copy Link
- Report Inappropriate Content
@KimcheeGUN Right. I deactivated again LAG group on switch. Now working all with Routing with Port ID. Server restarted. Very strange .
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 586
Replies: 7
Voters 0
No one has voted for it yet.