Self-Hosted Cloud Controller problems
I have a windows 2019 server setup in my office with the latest controller software installed.
Devices in my office adopt just fine.
However, I am trying to setup other offices across the internet.
I have a DNS name registered omada.bryma.cloud
I have the firewall ports open and forwarded in the firewall:
TCP
8043,8088,8843,27217,29811,29812,29813,29814,29815,29816
UDP
29810
I go to a router (ER605) and set the INFORM URL to:
omada.bryma.cloud
but the device never shows up.
I have tried it with checking the ENABLE cloubd based controller and unchecking it.
Not sure what I am missing.
Any ideas?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
everything looks right, do you have screenshot of ER605 config?
and does the ER605 have access to the internet?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
The router is currently configured locally and internet is working.
Here is the other way I have tried the config:
- Copy Link
- Report Inappropriate Content
ok, cloud based controller is not nessesary.
and your config is as it should be. I do a test to your port and all is accessible from internett.
how is your ER605 connected ? have router access to internett on wan interface?
I guess you are familiar with unifi :-) and omada is prety mutch the same when come to adopt device.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I am thinking that there must be something in my firewall that is not correct as far as port forwarding..
I have a unifi controller that is working just fine.
Here is the scenario
I have tried both the ER605 and the ER7206
When I plug them into the network where my Omada controller resides, they show up in devices and can be adopted. I do not have to configure the CONTROLLER INFORM URL
When I take them outside to another location, when I plug them in and go to the Controller settings, and plugin the URL of our controller, the devices never show up in the controller for adoption.
I have the following ports forwarded on my firewall (same process I use for the UNIFI controller)
TCP: 8043,8088,8843,27217,29811,29812,29813,29814,29815,29816
UPD: 29810
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 562
Replies: 7
Voters 0
No one has voted for it yet.