How to configureate to use as a Access Point

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to configureate to use as a Access Point

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to configureate to use as a Access Point
How to configureate to use as a Access Point
2024-02-17 17:48:48
Model: CPE210  
Hardware Version:
Firmware Version:

HI there!

I bought the CPE210 to extend my existing WLAN to my Garage where I haven`t a WLAN signal strong enough!

I amplanning to install a Photovoltaic system there and the inverter needs WLAN. And I need the inverter and the IP adress in my

Router to integrate it in Home Assistant.

 

I tried to set up the CPE210. But unfortunately when the CPE210 is powered on, all other WLAN and Internet connections are lost.

When I am unplugging the CPE frpm POE again, all other connections are building up again.

 

So did I understood the functions of the CPE correct? Is it possible to extend the WLAN network and what do I have to do so that

this will work?

Cheers
Sky

  0      
  0      
#1
Options
2 Reply
Re:How to configureate to use as a Access Point
2024-02-18 07:58:05

  @SkyWalker2_D 

 

Check the physical connection, where did you plug into the cable? Connect the CPE to the router, not the modem.

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:How to configureate to use as a Access Point
2024-02-18 09:16:17

  @Virgo 

 

Hi!

 

I plugged in the CPE in my Laptop first without WLAN access for the Laptop.

 

I followed the instruction of an video an changed the IP adress first. Then I opened the CPE adress to make the configuration

 

https://youtu.be/4jyU_lka9E8?si=Js2CDmvcgJ9Ve6Gf

 

But I am an absolute noob regarding network and stuff. So maybe I don't understand what to do and if the CPE is the hardware I need for my needs.

 

Cheers

Sky

  0  
  0  
#3
Options