Real Time Bandwidth Feedback?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Is there anywhere in the Omada Controller that I can go that will show the (near) real time bandwidth usage of a specific interface? Something like this:
(this is from a different router that I use at another location). It updates every second or so.
I found this:
but it seems to not update very often. Maybe every 30 seconds or so, and I am not sure if it is an average over that 30 seconds, or if it is a 'when checked' value.
muzicman0 wrote
Is there anywhere in the Omada Controller that I can go that will show the (near) real time bandwidth usage of a specific interface? Something like this:
(this is from a different router that I use at another location). It updates every second or so.
I found this:
but it seems to not update very often. Maybe every 30 seconds or so, and I am not sure if it is an average over that 30 seconds, or if it is a 'when checked' value.
Hi @muzicman0
You can go to statistic > switch statistic to view the current status of ports and their traffic statistics of the selected switch in the specified time range via a monitor panel and graphs. The minimum time interval is 5 minutes.