[Failed]The controller failed to mail global logs to <email address> automatically
Controller Version
5.14.26.23
Firmware Version
2.16.3 Build 20240620 Rel.81038
I just thought I'd try out the cool feature to email myself logs when issues occur. I programmed everything correctly, and test email works fine. But I get that message in my Events log and I never get an email.
This seems to be an issue that's been going on for at least a year by reading some older messages. Is there a checkbox I mixed to get it to automatically email me even when the Test Email is successful? I don't use any cloud access, it's all programmed into the Settings->Server Settings section. My user is a Local User with Main Administrator role. The email address is entered into that account, and the Alert Emails is checked.
Thanks,
Tom
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Vincent-TP Yup. It's configured correctly. The Test Email button works perfectly and sends me an email. I did have to enable Event Emails, but it made no difference.
What decade was that help link from? My interface was totally different. My "Mail Server" was actually in Global->Settings->Server Settings.
The other settings were at: Site->Logs->Notifications->Alert->Alert Emails and Site->Logs->Notifications->Event->Event Emails
I made sure all those options in the help link were enabled and setup correctly, and the test button sent an email.
BTW, Global->Settings->Server Settings->Sender Address doesn't work. I put something in there, but the email still says it's from me, the email address in Username to log into the SMTP server (From: Omada SDN Controller <my_email_address>). I'm guessing it's probably because of all those security measures in place with email to not allow email to be impersonated and the From field to be changed.
EDIT: I got it to work! I had to change Global->Settings->Server Settings->Sender Address to the same as Username email address. I think maybe my SMTP server is rejecting the email because the From field is something other than my username email address. But it's weird that the Test Email button works, probably just a bug.
Also, the (?) help link in the controller states "Sender Address: Specify the sender address of the email. If you leave it blank, the controller will uses your email address as the sender address.". But, I cannot leave Sender Address blank, it won't let me click Apply. A slight bug in the interface.
- Copy Link
- Report Inappropriate Content
Hi @MrTom
You may first refer to this link to make sure the SMTP server is correctly configured.
Why we need to configure mail server on Omada SDN controller before adding cloud user and email log
- Copy Link
- Report Inappropriate Content
@Vincent-TP Yup. It's configured correctly. The Test Email button works perfectly and sends me an email. I did have to enable Event Emails, but it made no difference.
What decade was that help link from? My interface was totally different. My "Mail Server" was actually in Global->Settings->Server Settings.
The other settings were at: Site->Logs->Notifications->Alert->Alert Emails and Site->Logs->Notifications->Event->Event Emails
I made sure all those options in the help link were enabled and setup correctly, and the test button sent an email.
BTW, Global->Settings->Server Settings->Sender Address doesn't work. I put something in there, but the email still says it's from me, the email address in Username to log into the SMTP server (From: Omada SDN Controller <my_email_address>). I'm guessing it's probably because of all those security measures in place with email to not allow email to be impersonated and the From field to be changed.
EDIT: I got it to work! I had to change Global->Settings->Server Settings->Sender Address to the same as Username email address. I think maybe my SMTP server is rejecting the email because the From field is something other than my username email address. But it's weird that the Test Email button works, probably just a bug.
Also, the (?) help link in the controller states "Sender Address: Specify the sender address of the email. If you leave it blank, the controller will uses your email address as the sender address.". But, I cannot leave Sender Address blank, it won't let me click Apply. A slight bug in the interface.
- Copy Link
- Report Inappropriate Content
Hi @MrTom
Glad to hear that you have finally made it work!!!
For the (?) help link in the controller states "Sender Address, thank you so much for the feedback, I will forward it to our R&D team and they will modify it in the subsequent firmware update.
- Copy Link
- Report Inappropriate Content
@Vincent-TP Also remember to let them know there's something different between the Send Test Email and the automated email in how each one uses Sender Address.
Thanks,
Tom
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 397
Replies: 4
Voters 0
No one has voted for it yet.