cpe510 unstable conection
Morning iam new to this cpe story.. i have connected two cpe510 from my main house to a house i rent out and after multi-able attempts by moving location of poles and heights i had speeds of 95mps in light rain conditions. I have from then had majority of the time 3mps for past 2 months and the one day about 60mps then back to 3mps.. we thought it could be wind but had 3mps on windless day.
Could it be a setting? i have tried to play there to but no luck.
also was thinking to upgrade the sender unit to the cpe710 so i got more power transmitting.
distance between two houses is close to 700m
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @519Franco
Please send a screenshot of the Status page, let's check if there is anything else we can do.
To improve the transmit power, it is a good idea to update to CPE710, but one is not enough, you may change both the transmitter and receiver to CPE710. What's more, CPE710 has gigabit LAN port while CPE510 is limited to 100M.
In the meantime, you can have a look at this guide:
How to troubleshoot the CPE in AP and Client mode when the wireless speed is slow
- Copy Link
- Report Inappropriate Content
Hi @519Franco
Please send a screenshot of the Status page, let's check if there is anything else we can do.
To improve the transmit power, it is a good idea to update to CPE710, but one is not enough, you may change both the transmitter and receiver to CPE710. What's more, CPE710 has gigabit LAN port while CPE510 is limited to 100M.
In the meantime, you can have a look at this guide:
How to troubleshoot the CPE in AP and Client mode when the wireless speed is slow
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 315
Replies: 3
Voters 0
No one has voted for it yet.