Omada EAP215 Bridge no VLAN-Passthrough?

Omada EAP215 Bridge no VLAN-Passthrough?

Omada EAP215 Bridge no VLAN-Passthrough?
Omada EAP215 Bridge no VLAN-Passthrough?
2024-09-14 17:38:43
Model: EAP215-Bridge KIT  
Hardware Version: V1
Firmware Version: 1.04

In an Omada system, over 25 units (ER 7206 /6x EAP610/10x EAP225) are connected with Vlan (1, 50, 100, 200).
CPE710 antennas are used over long distances. Everything works wonderfully.
Now the Bridge215 is to be used as a new connection over 1KM.
Set up and running. 
However, if wlan networks with V-Lan are set on the client bridge, there is no connection.
If, for example, an EAP225 is connected behind the client bridge, its WLAN networks with VLAN do not get through. 

If I take the Vlans out, there is a connection.
All devices are controlled via the Omada software.
So is it really possible that this bridge does not do VLAN passthrough?

Or am I doing something wrong? All settings (the few) are in the default setting.

 

If this is really the case, this bridge is probably not suitable for large Omada networks.

 

Stefan

  1      
  1      
#1
Options
3 Reply
Re:Omada EAP215 Bridge no VLAN-Passthrough?
2024-09-23 01:44:34
Oh no - does this mean that I would not be able to use even a management vlan for the remote EAP215 and any omada devices beyond the remote EAP215? This would be very important to clarify...
  0  
  0  
#3
Options
Re:Omada EAP215 Bridge no VLAN-Passthrough?
2024-09-23 12:51:53

  @ColleLupi 

Your problem with the management VLan can be set via Omada under Devices. However, this does not solve our problem. 
With several locations spread over an area of approx. 5km, the directional antennas must have Vlan passthrough. As the individual WLAN networks must be separated.
The EAP 215 Bridge cannot be used in this way. We have made a few speed and distance measurements. The performance of the bridge stops after just under 500 metres. 100m 160 down/20 UP, 500m 60 down/ 12 UP.
The old devices such as CPE 710 still have a performance of 140/20 after 3km. 
Unfortunately, we have already thrown away the required original packaging for a return. We have never returned a device out of over 100 Tp-Link devices. Times are changing.
 

  0  
  0  
#4
Options
Re:Omada EAP215 Bridge no VLAN-Passthrough?
2024-09-25 08:51:53

  @ColleLupi 

Hi

Sorry, I was wrong. If the VLAN configuration is correct, the VLAN SSIDs should also work on the client side. To locate the reason, we create a support ticket to collect more information. Please search TKID240957552 from your email inbox. Thanks.

  0  
  0  
#5
Options

Information

Helpful: 1

Views: 290

Replies: 3

Related Articles