Sharing Starlink Between Sever Buildings on Same Property
Hi,
I have the following setup for distributing my Starlink BB around the various buildings on my property (the furtheest distance between the main haouse and any out-building is 75m/yds)...
I have it all working but would like to clarify a few points...
1/ Is the general setup layout as it should be as for as the CPE210's are concerned? I have the 2 CPE210s on the main house on the same network, ie 192.168.1.xxx but with different static addresses. Is this as it should be?
2/ What sort of connection speed should I be able to get between the AP and Clients as shown in the Pharos web admin page (Status > Throughput tab)?
3/ The 2 Generic wifi APs I am using are very neat but are not very well documented. I have them set as Acess Points but the main setting that I am struggling with beyond that is a page that offers a choice of Internet Protocols of PPPoE, DHCP Static IP and Repeater. Set as 'Repeater' they do appear to work bt I am not convinced they re optimally configured. This is their 'Status' page...
Any help with clarification on the above would be gratefully recieved. MW
Thank you. I have tried contacting the supplier of the APs I'm using to get some more info but not received a reply. Here is the not wildly comprehensive 'manual' and I hope you can give me a clue as to their best configuaration from what the manual contains (sorry about the qualit - I can re-do it better if it helps):
