F61 Festa Ax1800 Access Point, cannot see how to set SSID password in standalone mode
I have decided I do not want to run the free festa cloud controller and just want to run the festa f61 access point in stand alone mode.
I cannot see any instructions or logically on the standalone interface accessed via the device IP address how to set a password for SSID?
By default it's an unsecured network with no password
can you please advice with screenshot?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Penfolds
The Festa AP (Access Point) provides a standalone web page for basic troubleshooting, but there are limited following functions you can setup.
1. Basic wireless configuration
2. Firmware update
3. System reboot/reset
4. SSH server
For more detail on the available functions, please take a look at this FAQ:
How to troubleshoot Festa access points in the Standalone mode
For more features, please turn to controller mode.
- Copy Link
- Report Inappropriate Content
Hi @Penfolds
The Festa AP (Access Point) provides a standalone web page for basic troubleshooting, but there are limited following functions you can setup.
1. Basic wireless configuration
2. Firmware update
3. System reboot/reset
4. SSH server
For more detail on the available functions, please take a look at this FAQ:
How to troubleshoot Festa access points in the Standalone mode
For more features, please turn to controller mode.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 139
Replies: 1
Voters 0
No one has voted for it yet.