Business Community > All Threads > Omada OC300 + SG2210MP + EAP650-Outdoor with Local Network DHCP Problems
< All Threads

Omada OC300 + SG2210MP + EAP650-Outdoor with Local Network DHCP Problems

Omada OC300 + SG2210MP + EAP650-Outdoor with Local Network DHCP Problems

Omada OC300 + SG2210MP + EAP650-Outdoor with Local Network DHCP Problems
Omada OC300 + SG2210MP + EAP650-Outdoor with Local Network DHCP Problems
2025-03-18 07:50:38 - last edited 2025-03-19 06:24:41
Model: OC300   SG2210MP   EAP650-Outdoor  
Hardware Version: V1
Firmware Version: 1.28.2

 

OC300 V1.0 Frimware Version: 1.28.2 Build 20250110 Rel.74960

SG2210MP V4.20.6

EAP650-Outdoor V1.2.0

 

Hi,

 

I want to set up a local network with the devices I mentioned above. Secondly, I want to assign a static IP via MAC address reservation using DHCP.

 

 

However, the static IP part is not working.

 

I am following the steps as shown in the images below for the setup. However, the IP I assigned in the 'Use Fixed IP Address' field is not being obtained by the client.

 

 

 

 

 

Since the local TP-Link support line was insufficient in this matter, I wanted to ask here.

 

I look forward to your support for the correct setup steps.

 

Thanks.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Omada OC300 + SG2210MP + EAP650-Outdoor with Local Network DHCP Problems-Solution
2025-03-19 06:24:37 - last edited 2025-03-19 06:24:41

Hi  @mugurlu 

 

I want to assign a static IP via MAC address reservation using DHCP.

>>>This is a feature of routers, there is no Omada router adopted on the controller, all the related config won't take effective.

 

You can make it work with an Omada router.

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:Omada OC300 + SG2210MP + EAP650-Outdoor with Local Network DHCP Problems-Solution
2025-03-19 06:24:37 - last edited 2025-03-19 06:24:41

Hi  @mugurlu 

 

I want to assign a static IP via MAC address reservation using DHCP.

>>>This is a feature of routers, there is no Omada router adopted on the controller, all the related config won't take effective.

 

You can make it work with an Omada router.

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
Recommended Solution
  0  
  0  
#2
Options
Re:Omada OC300 + SG2210MP + EAP650-Outdoor with Local Network DHCP Problems
2025-03-19 06:33:18

  @Vincent-TP 

 

Is it not possible to configure the DHCP server and address reservation on the switch in standalone mode?

Why can't we do this with the Omada Controller?
Does that mean the Omada Controller does not have full control over the switch?

  0  
  0  
#3
Options
Re:Omada OC300 + SG2210MP + EAP650-Outdoor with Local Network DHCP Problems
2025-03-19 09:38:34

Hi  @mugurlu 

 

We can do this via CLI command under controller mode:

 

below is a guide:

CLI Configuration Guide for Omada SDN Controller (v5.9.9 and above)

 

And below is the command to configure DHCP reservation:

 

ip dhcp server pool "pool-name"

address 10.0.0.100 hardware-address 00:11:22:33:44:55 hardware-type ethernet

 

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 181

Replies: 3

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.