Region : Argentina

Model : TL-ER6120

Hardware Version : V1

Firmware Version :

ISP :

There are a couple how-to guides, e.g. "How to setup site-to-site PPTP VPN on TP-LINK Router - Welcome to TP-LINK.pdf" on how to setup site-to-site vpns systems when using two TL-ER6120 VPN routers.

I'm trying to use one TL-ER6120 to make a site-to-site vpn connection with a standard windows 2008 remote access server running PPTP vpn server..

Normal WinPC, OSX, android clients can PPTP client connect to the PPTP server without problems.


Layout:

(1) PC (Lan 192.168.0.2) <---> access internal resources <---> TL-ER6120 (Lan 192.168.0.1) <---> FIOS Modem/router (Lan 192.168.1.1 & public IP x.x.79.x) <---> INTERNET <---> Win2008 PPTP server (public ip x.x.175.x --> client pool x.x.175.x to xx) <---> (2) access internal resources

I've followed those guides, and can connect the TL-ER6120, can establish an active / stable vpn connection between the TL-ER6120 and the Win2008 server.

However, I can not get traffic routed properly (1) <---> (2) to access resources in either direction.

I presume it is a routing table entry tat must be manually added as nothing else works

Oh, if the Wan is set to PPTP connect to the Win2008 server, traffic from (1) can see all of (2) I can not access resources on (1) from (2)

Any help?