CPE510 Error
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE510 Error
Region : Argentina
Model : TL-WA5210G
Hardware Version : Not Clear
Firmware Version : TP_PharOS_1.2.1_150522
ISP : MEO
Hello,
I bought two TP LINK CPE510 for the purpose of operating as a repeater, one in my house and the other to a client. The telephone support TP LINK told me that configured as a repeater could expand the signal to 3km smoothly, which is enough.
The point is that there is no way to set up as a repeater even as AP.
I will explain the structure of the network in my house:
Internet - Router operator that runs 2..4GHz, sending wireless also named "xy" for example.
I tried setting the TPLINK CPE510 in repeater mode but when I do the research networks not just find my wireless or any other (there is a couple of networks of neighbors) that comes in the smartphone for example! I tried to set up as AP, called the CPE510 to the router by cable, set up the wireless on cpe510 everything right, but once configured search the network I created on your smartphone, tablet or laptop and do not see it !!
And then as the CPE 510 runs at 5GHz and my structure at home (router operator) at 2.4GHz, I assumed that the problem could be here, different frequencies, and spoke to the telephone support of TPLINK again and was said he would have to buy a router TPLINK DUAL and already work! There spent more money and bought the TP LINK AC750 DUAL BAND, I got home and set the new router, I called to my cable operator router, set up a new wireless network operating at 2.4 and 5 GHz!
In the end, I went back to try to configure the CPE 510 as a repeater, this time and seek the networks but meeting new network created with the TP LINK AC750, I just setup and when I test if for example 1km from my house I found my wireless network simply is not, nor 1km or 500m or 300m ... ie not to repeat this or this my smartphone (Huawei P8 have a lite) do not see the network! Also I tried to set up as AP and passes the same thing!
Not honestly know what may be misconfigured !! grateful for your help. the mobile devices like smartphones and tablets recent or portable should see a wireless network at 5GHz right?
Thank you,
M. N.
Model : TL-WA5210G
Hardware Version : Not Clear
Firmware Version : TP_PharOS_1.2.1_150522
ISP : MEO
Hello,
I bought two TP LINK CPE510 for the purpose of operating as a repeater, one in my house and the other to a client. The telephone support TP LINK told me that configured as a repeater could expand the signal to 3km smoothly, which is enough.
The point is that there is no way to set up as a repeater even as AP.
I will explain the structure of the network in my house:
Internet - Router operator that runs 2..4GHz, sending wireless also named "xy" for example.
I tried setting the TPLINK CPE510 in repeater mode but when I do the research networks not just find my wireless or any other (there is a couple of networks of neighbors) that comes in the smartphone for example! I tried to set up as AP, called the CPE510 to the router by cable, set up the wireless on cpe510 everything right, but once configured search the network I created on your smartphone, tablet or laptop and do not see it !!
And then as the CPE 510 runs at 5GHz and my structure at home (router operator) at 2.4GHz, I assumed that the problem could be here, different frequencies, and spoke to the telephone support of TPLINK again and was said he would have to buy a router TPLINK DUAL and already work! There spent more money and bought the TP LINK AC750 DUAL BAND, I got home and set the new router, I called to my cable operator router, set up a new wireless network operating at 2.4 and 5 GHz!
In the end, I went back to try to configure the CPE 510 as a repeater, this time and seek the networks but meeting new network created with the TP LINK AC750, I just setup and when I test if for example 1km from my house I found my wireless network simply is not, nor 1km or 500m or 300m ... ie not to repeat this or this my smartphone (Huawei P8 have a lite) do not see the network! Also I tried to set up as AP and passes the same thing!
Not honestly know what may be misconfigured !! grateful for your help. the mobile devices like smartphones and tablets recent or portable should see a wireless network at 5GHz right?
Thank you,
M. N.
