Secure Easy Smart Configuration Utility on TL-SG108E

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Secure Easy Smart Configuration Utility on TL-SG108E

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Secure Easy Smart Configuration Utility on TL-SG108E
Secure Easy Smart Configuration Utility on TL-SG108E
2015-07-20 22:39:06
Region : Argentina

Model : TL-SL2210WEB

Hardware Version :

Firmware Version :

ISP :


I am about to buy a couple of TL-SG108E switches.
The switches are connected to both a secure and an insecure network.
The idea is to separate them by putting them on a separate VLAN.

The only thing I cannot get a clear answer on is this: is it possible to prevent access to the "Easy Smart Configuration Utility"-port from the insecure VLAN?

Many thanks
  0      
  0      
#1
Options
1 Reply
Re:Secure Easy Smart Configuration Utility on TL-SG108E
2018-02-08 10:50:02

Johhny wrote

The only thing I cannot get a clear answer on is this: is it possible to prevent access to the "Easy Smart Configuration Utility"-port from the insecure VLAN?


You most certainly mean the web UI (the ESCU runs on your PC, not on the switch). The answer is: no, the web UI can be reached through any VLAN if one knows the IP assigned to the switch. If you need to isolate the web UI from certain VLANs, use a Smart switch (for example, a TL-SG2008), not an Easy Smart switch.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#4
Options